Tintable, Ready Mix Latex Waterproofer

Damtite Tintable - Ready Mix Latex

  • 10-year Waterproofing Guarantee
  • Withstands 55 ft (16,7 m)Wall of Water
  • Low Odor; Easy Clean-up
  • Reduces Radon Gas Penetration

Damtite Latex Waterproofer is a low-odor, high performance masonry waterproofer with a bright white finish. Ideal for interior & exterior, above & below grade applications. This durable, alkali-resistant coating provides excellent waterproofing protection with a slightly textured, decorative finish for all masonry, cinder & concrete block, poured concrete, brick, stone, stucco, basement, garage and retaini ng walls & foundations. No pre-mixing or pre-wetting is needed. Stops over 25 psi of hydrostatic water pressure. Fast drying with easy soap & water cleanup. Tests Passed: ASTM D-7088 Resistance to Hydrostatic Pressure & ASTM D-6904 Resistance to Wind Driven Rain. Note: Not for use on floors or horizontal surfaces. Will not withstand foot traffic. May be applied over previously-painted surface in sound condition but the warranty is void, since Damtite must enter pores to perform.

Available in 1 gallon & 5 Gallon sizes.

Provides best results applied to dry surfaces when no rain expected for several days, but surface can be slightly damp. Clean the surface thoroughly, removing any loose mortar, paint, dirt, dust, grease, oil, form-release agents or algae. Follow Damtite’s Step 1-2-3 Project Guide, including: Step 1 – Prepare the Surface: Remove any powdery, salt-like deposits (efflorescence) or neutralize alkali with Damtite Concrete Cleaner. Rinse thoroughly. Step 2 – Repair the Surface: Patch cracks or holes in the mortar joints, wall-floor joints, or in the concrete block with Damtite Waterproof Hydraulic Cement. Step 3 – Decorate & Waterproof: Apply two coats

Gallon coverage – On rough, porous surfaces, expect 75-100 sq. ft. (7-9,3m²); on smooth concrete or previously painted areas, up to 125 sq. ft. (11,6m²).

Translate »